What to look out for when purchasing test leads

What to look out for when purchasing test leads

There are currently a large number of test leads on the market, with prices ranging from a few pounds to over a hundred pounds. How do you determine which leads are right for the tests you want to run?
The first thing you should consider is, how many amperes will run through this cable? This is critical because high amperages can quickly cause the wire to heat up and cause damage to the wire and its surroundings. Many test leads are blown; This means that the test lead will contain a fuse. This provides an additional level of protection for any tester. To help save time and money, it's worth making sure that the fuse limits are appropriate for the test being performed. All test leads feature standard 4mm connectors, which means most leads can be used with any test equipment.
An important thing to keep in mind when using new leads is that the accuracy of the readings can be affected by many different factors. These may include the length of the leads and the presence or absence of any fuses. This can be solved by zeroing out the tester before use. The recommended way to get maximum accuracy from a test instrument is to ensure that the exact leads specified by the tester are used. This ensures better results, and if there is a problem, you can worry about one thing less.

The most common problems that any cable may have tend to occur due to wear and tear. These issues include:
The winding wire is too tight because this can lead to heat generation
Scratches and insulation damage caused by overheating or direct damage
Damage to the core due to excessive bending or crushing
Dirt or oxidation on the connector itself
Many of these problems can be prevented with proper care and attention, but eventually you will have to buy a new set of test lines.

To help protect your cable for the longest time, it is important to ensure that the coating on the leads is appropriate for the environment in which it will be used. PVC coated leads are one of the toughest leads, but it may be stronger compared to other materials. In contrast, silicone coatings provide more flexible lead, but are also more susceptible to damage. Cage probes used to be very popular because they were extended in a way that provided better contact, resulting in better readings. However, they are falling out of favor. To comply with regulations, most test probes are shielded, which means engineers can protect themselves from the high voltages that can pass through the probe and provide additional protection against accidental injuries, such as stabbing themselves.

When purchasing new test leads, the main consideration should be first of all the leads to be able to apply current, and second, they are the leads of the tester you have, which will ensure a long lead life and highly accurate readings.
 

Test leads for multimeter

Test leads for multimeter


This probe test lead cable is generally applicable to most digital multimeters. The test lead is added with elastic material, which is soft and has high temperature resistance, frost resistance and excellent tensile flexibility. 

Read More