Banana plugs|Classification and application of speaker wire plugs
The wire in the audio equipment has a great influence on the sound, but how big is the impact? It is difficult to explain the change of the sound with data. Everyone has different requirements and criteria for the sound. It can only be determined by the user's personal preference. The most important part of the wire is generally the speaker wire, which refers to the wire connecting the speaker and the power amplifier. The most important thing about the speaker cable is the conductivity, that is, the signal used to transmit power. Due to the heavy conductivity, it is easy to find that the speaker cable for fever has a rather thick design. Everyone will start using a set of cheap speaker cables, and when you go to buy a new speaker cable, one of the most introductory questions, what connectors do you want to use to make and choose speaker cables? The head and tail of the speaker cable generally have plugs to help connect the power amplifier and speakers. The speaker cable plug is a secondary audio entry problem to be discussed and shared! ?
Speaker Cable
In addition to active speakers, general speakers require speaker cables, and the head and tail of speaker cables are usually equipped with speaker plugs, which generally match the three mentioned above. No matter which type of plug is used, it actually has the same characteristics. and transmission functions, let us introduce them one by one so that everyone can better understand their uses and differences.
bare wire
First of all, at first, we bought the simplest, most convenient and affordable speaker cable when playing audio. What is the most commonly used plug for the first pair of speaker cables? My answer is bare wire, i.e. just buy a pair of wires without a plug. Connect the speaker directly with bare wire. The so-called naked view is to directly open the front end of the speaker wire, and directly lock the exposed metal of the speaker wire with the inner conductive metal body with the speaker wire connector position on the back of the speaker. Simple and straightforward! In fact, when you ask which kind of speaker wire plug is the best, the answer is often bare wire is the best, because it is the most direct way to connect your wire to conduct electricity, and there is no need to go through an additional connector for indirect conduction, which affects the sound, so it is recognized that bare wire Wires are actually the best way to connect speakers. However, bare wires also have disadvantages, including the effect of metal oxidation caused by wet weather and long-term exposure of metal bits to air, which affects the sound quality. Even some speakers may short circuit or damage the equipment once the speaker cable is loose. Moreover, if the structure of the speaker cable is complex and multi-core, or the core is too thick, it is difficult to connect with bare wires.
Fork plug/Y plug
The most common plug used is the fork plug or Y plug, which can be distinguished by looking at the sample. For the Y type or fork type plug, it is not difficult to connect the fork plug to the speaker, just loosen the knob on the speaker socket, and then Align the notch of the fork with the horn terminal to make it tightly engaged, and then use the knob to lock and fix it in reverse. As far as the fork plug is concerned, it has a large contact surface and has an excellent fixation effect on the speaker. It is the favorite type of plug for audiophiles.
Banana plugs and wave plugs
In fact, it is difficult to describe the plug in words. Anyway, you can understand what a banana plug is by looking at the picture, and the wave plug is actually used in the same way as the banana plug, except that it looks like a wave, and it is classified into the same category. The biggest advantage of banana plugs is that they are convenient and easy to use. The so-called plugandplay can be plugged/unplugged quickly, which is absolutely convenient for enthusiasts who often want to plug in. As for the sound, it is said that if a speaker plug must be used, the fork plug will have more contact surfaces than the banana plug.
However, it depends on 2 factors to decide which plug to use
1. The connecting column of your speaker and amplifier, sometimes some equipment can only use a certain kind of plug, such as only a fork. Or your cable is too hard to be twisted, and the fork head is inconvenient to connect, so you can only use the banana head to plug in straight from the back. That is, the most important thing is to accommodate the equipment itself.
2. Depends on the quality of the plug itself, which can explain and refute the bare wire family. The plug does have the difference of high and low levels. A good high-end plug connected to the speaker wire will change the sound and may make the sound become Better, probably based on improved electrical impedance.
Speaker Cable
In addition to active speakers, general speakers require speaker cables, and the head and tail of speaker cables are usually equipped with speaker plugs, which generally match the three mentioned above. No matter which type of plug is used, it actually has the same characteristics. and transmission functions, let us introduce them one by one so that everyone can better understand their uses and differences.
bare wire
First of all, at first, we bought the simplest, most convenient and affordable speaker cable when playing audio. What is the most commonly used plug for the first pair of speaker cables? My answer is bare wire, i.e. just buy a pair of wires without a plug. Connect the speaker directly with bare wire. The so-called naked view is to directly open the front end of the speaker wire, and directly lock the exposed metal of the speaker wire with the inner conductive metal body with the speaker wire connector position on the back of the speaker. Simple and straightforward! In fact, when you ask which kind of speaker wire plug is the best, the answer is often bare wire is the best, because it is the most direct way to connect your wire to conduct electricity, and there is no need to go through an additional connector for indirect conduction, which affects the sound, so it is recognized that bare wire Wires are actually the best way to connect speakers. However, bare wires also have disadvantages, including the effect of metal oxidation caused by wet weather and long-term exposure of metal bits to air, which affects the sound quality. Even some speakers may short circuit or damage the equipment once the speaker cable is loose. Moreover, if the structure of the speaker cable is complex and multi-core, or the core is too thick, it is difficult to connect with bare wires.
Fork plug/Y plug
The most common plug used is the fork plug or Y plug, which can be distinguished by looking at the sample. For the Y type or fork type plug, it is not difficult to connect the fork plug to the speaker, just loosen the knob on the speaker socket, and then Align the notch of the fork with the horn terminal to make it tightly engaged, and then use the knob to lock and fix it in reverse. As far as the fork plug is concerned, it has a large contact surface and has an excellent fixation effect on the speaker. It is the favorite type of plug for audiophiles.
Banana plugs and wave plugs
In fact, it is difficult to describe the plug in words. Anyway, you can understand what a banana plug is by looking at the picture, and the wave plug is actually used in the same way as the banana plug, except that it looks like a wave, and it is classified into the same category. The biggest advantage of banana plugs is that they are convenient and easy to use. The so-called plugandplay can be plugged/unplugged quickly, which is absolutely convenient for enthusiasts who often want to plug in. As for the sound, it is said that if a speaker plug must be used, the fork plug will have more contact surfaces than the banana plug.
However, it depends on 2 factors to decide which plug to use
1. The connecting column of your speaker and amplifier, sometimes some equipment can only use a certain kind of plug, such as only a fork. Or your cable is too hard to be twisted, and the fork head is inconvenient to connect, so you can only use the banana head to plug in straight from the back. That is, the most important thing is to accommodate the equipment itself.
2. Depends on the quality of the plug itself, which can explain and refute the bare wire family. The plug does have the difference of high and low levels. A good high-end plug connected to the speaker wire will change the sound and may make the sound become Better, probably based on improved electrical impedance.
Leave a comment